Firstly, you need to inflate your board. The more pressure you put in, the more obvious the leak will be, we recommend inflating to around 20psi. Slowly an...

If you have identified that air is escaping from your valve (My board is leaking but I can't find where?) rest assured that this should be easy to sol...

Your board comes with a set of colour matched patches that are suitable for your board. Due to shipping/storage legislation, we do not send the repair kits...

If your valve dust cap comes off, It is a good idea to re-attach this to keep your valve free from debris such as grit.  To do this, you will need to re...

Thank you for being in touch, it's lovely to hear you have our Ride. As these are all-round family boards, the flexible fins are a really important pa...

Your board should be stored in a cool dry place, out of direct sunlight and either rolled up and stored in the bag, If storing for a long time without u...

You should have a spare fin bolt and nut within your repair kit. If you do need a replacement, we have our very well stocked Red Spares Website where you ca...