Product Information

Any solution regarding boards.

There is a bump under my board valve, what is it?
It sounds like you have found what we call 'The Bump'!  The bump can be seen on the back of every single Inflatable board in the world. It is...
Fri, 4 Mar, 2022 at 11:26 AM
How to roll your board
Firstly, we recommend having your All-Terrain Bag open and ready to go, with your board deflated and your board strap nearby.  Place your pump at the no...
Fri, 4 Mar, 2022 at 11:48 AM
How to pack up your Compact board
Firstly we recommend having your Compact Bag open and ready to go. Deflate your board and have your board strap near to the tail of your board. Fold you...
Fri, 4 Mar, 2022 at 11:39 AM
How much pressure you need in your board
We recommend inflating your board between 15-22psi. For heavier riders we recommend aiming for 18-22psi and for lighter riders we suggest 15-18psi. If you&#...
Thu, 17 Mar, 2022 at 5:11 PM
How long you can leave your board inflated
The boards are designed to be inflated, so you can leave them blown up all season if you would like. Over time, you may experience some loss of pressure, ...
Fri, 4 Mar, 2022 at 1:06 PM
How to mount your camera onto your board
If you have a board from our 2020 range, you can use our M6 threaded Camera Mount. We have our paddle board accessories mount page on our website if you...
Fri, 4 Mar, 2022 at 11:58 AM
How to insert your RSS Battens
Here are some tips on how to insert your RSS battens: 1. Inflate the board to 1psi - this is when the board has just taken shape and has enough air for ...
Fri, 4 Mar, 2022 at 11:50 AM
How to insert your click fins to your compact board
When inserting your click fins, line the fin up with the fin box and ensure it is pushed down before sliding backwards to click into place. If you have the ...
Fri, 4 Mar, 2022 at 11:51 AM