Our Red Original coolbag attaches securely to the deck of your board with our unique tensioning system, making it a breeze to take with you on even the longest of adventures.

1. Firstly, centrally position your Cool Bag on the front of your board and unhook the clips

2. Connect all four clips to the Cargo Point D-Rings located on the front of the board

3. Apply tension to the cord by adjusting its length using the tri-hole slider located on the cord

4. With the Cool Bag securely attached, make sure the zipper is fully closed before going out on the water

5. When you are finished with your paddle don’t forget to reclip the clips back onto the Cool Bag